Ventilated Cable Tray

Ventilated Cable Tray

The ventilated cable tray has a perforated body, straight side rails, and matching fittings for clear cable routing. It is useful when cable heat needs to move out and later inspection should stay simple.
Send Inquiry

A ventilated cable tray is used to support power cable, control cable, and signal cable in workshops, equipment rooms, and building service areas. The open holes let air pass through the tray, so the cable group is easier to cool and easier to check during maintenance. The tray gives cables a steady path above machines, along walls, or inside power rooms. A ventilated cable tray can also be matched with covers, bends, tees, connectors, and brackets, so the route can turn or branch without rough cutting on site.

 

Product Parameters

 

Parameter

Specification

Material options

Stainless steel, galvanized steel, pre-galvanized steel, or coated steel

Structure

Perforated tray body with side rails and ventilation holes

Width range

100 mm to 800 mm, custom size available

Height range

50 mm to 200 mm

Thickness

1.0 mm to 2.5 mm, based on load and span

Surface

Polished, galvanized, powder coated, or passivated finish

Accessories

Cover, connector plate, elbow, tee, cross, bracket, and bolts

Application

Cable routing in buildings, plants, tunnels, and power rooms

 

Product Advantages

 
 

 

The open structure reduces extra weight and makes lifting easier on site.

 
 
 

 

Smooth edges and matched fittings help protect cable jackets during pulling and fixing.

 
 
 

 

For projects that need cooling and visible cable paths, the ventilated cable tray is easier to maintain than a fully closed trough.

 

 

Main Applications

 

1. Electrical rooms where cable heat needs to leave the cable group in time.

2. Factory production lines where cable routes may need checking or small changes later.

3. Semi-outdoor routes where a cover can be added for dust or splash protection.

 

image005.jpg
image005.jpg
FAQ

Q: Can it be used with a cover?

A: Yes. A cover can be added when the area has dust, dripping water, or falling objects.

Q: Which surface is better for a wet area?

A: Galvanized, coated, or stainless steel surfaces can be selected according to the real site.

 

 

 

 

Hot Tags: ventilated cable tray, China ventilated cable tray manufacturers, suppliers, factory, 150 mm cable tray, fiberglass cable ladder, frp ladder tray, frp ladder type cable tray, stainless steel cable ladder, supporting cable tray