Hot Dip Galvanized Cable Tray

Hot Dip Galvanized Cable Tray

Hot Dip Galvanized Cable Tray receives zinc after the carrier is formed.
Protection is at least 65 μm; the heavier class is at least 85 μm for exposure.
Send Inquiry

Dipping follows fabrication, allowing zinc to reach lips, corners, punched zones, and completed contours. Sacrificial action slows oxidation if moisture reaches the steel. The formed substrate supplies tensile, bending, and impact capacity for cable weight and outside forces. Hot Dip Galvanized Cable Tray may use an enclosed channel for shielding, a ventilated pan for heat release and inspection, or an open rung frame for larger power conductors. Covers, brackets, couplers, grounding leads, elbows, risers, branches, reducers, and junction pieces continue the route through turns, extensions, and vertical level changes safely.

 

Product Parameters

 

Parameter

Details

Base Material

Cold-rolled steel sheet.

Manufacturing Order

Press, form, then hot-dip galvanize.

Regular Deposit

≥65 μm.

Heavy Deposit

≥85 μm.

Design Span Reference

6-8 m, subject to load calculation.

Atmospheric Life Reference

10-15 years in general or humid conditions.

Available Structures

Trough, perforated tray, and ladder.

 

Product Advantages

 

• Post-forming immersion reaches lips, corners, and punched areas, reducing exposed steel edges after fabrication.

• Sacrificial zinc delays steel oxidation in ordinary or damp service, lowering routine corrosion-maintenance demand.

• Formed carbon sheet carries cable weight while resisting pulling, bending, and installation impact.

• Hot Dip Galvanized Cable Tray reduces material cost where the environment does not require stainless alloy.

• Enclosed, perforated, and rung bodies provide shielding, ventilation, access, or support for larger conductors.

• A 10-15 year atmospheric reference supports maintenance planning for the stated exposure.

• Correct calculation can permit a 6-8 m span, reducing supports where loading allows.

 

Components

 

The galvanized body may be enclosed, perforated, or rung type according to shielding, ventilation, access, and conductor size. A lid adds upper protection where required. Brackets and hangers create support points, couplers join lengths, and grounding leads maintain continuity. Elbows, risers, reducers, branches, and junction fittings carry the pathway through turns, elevation changes, width transitions, and distribution points.

 

image009.jpg
image005.jpg

 

FAQ

Q: Why is immersion performed after shaping?

A: Immersion after shaping lets zinc follow lips, corners, holes, fabricated surfaces, and completed contour transitions evenly and uniformly.

Q: Which grade suits more corrosive surroundings?

A: Select the minimum 85 μm class where stronger corrosion protection is required.

Q: What should be reviewed before ordering Hot Dip Galvanized Cable Tray?

A: Confirm body form, gauge, cable mass, load, support interval, exposure, lid, grounding, fittings, and route changes.

 

 

 

Hot Tags: hot dip galvanized cable tray, China hot dip galvanized cable tray manufacturers, suppliers, factory, 4 cable tray, cable tray management system, cover for cable tray, fiberglass cable ladder, galv tray, hot dip cable tray